【NEED TO KNOW BEFORE BUYING】
● This Product Is Suitable For Repairing Small Dents, Slight Dents And Hail Pits.Not Suitable For Corners Or Creases And Dents On Thick Sheet Metal Such As The Big Truck.
● We Suggest That You Use Hot Melt Adhesive, As Other Glues May Damage Your Car Paint. When Removing The Glue, We Suggest That You Spray It With Alcohol, And Then Remove The Hot Melt Adhesive After Leaving It Vacant For A While To Avoid Hurting The Car Paint.
● Please Use It In Strict Accordance With The Instructions, Otherwise The Ideal Repair Effect Will Not Be Achieved.
Note:
If the original car paint has been repaired or has been damaged, this product cannot be used. This product does not damage the original paint when used.
Features:
100% Brand new and high quality.
It is made of aluminium alloy for strong strength and long durability.
Used as a adapter for slide hammer or pulling tap for easy catching and pulling.
A necessary component for dent repair, direct replacement for the broken one.
Easy installation, the thread size is M10 for better application.
Specification:
Material: Aluminum Alloy
Color:As the picture show
Type: M10
【Note】
1.Kit 1 only contains a puller and 18 blue tabs, excluding glue gun, glue stick and other accessories
2.If the operation would not succeed,please operate repeatedly.
Packing lncluded:
【Kit 1：Only Puller without Glue】
1 * Puller
18 * Tabs
【Kit 2：Puller with Glue Kits】
1 * Puller
18 * Tabs
1 * 20W Glue Gun(US/EU Plug)
5 * Glue Stick（7mm/0.28inch * 27cm/10.6inch）
1 * Shovels
1 * Towel
1* Alcohol bottle(Alcohol not included)
Steps for usage:
1. Clean the surface with a clean damp cloth.
2. Stick the glue stick on the gun, turn on the power, and warm up for 5-10 minutes.
3. Choose the glue pull tab according to the size of the dent, then put the heated glue on the pull tab, immediately put the pull tab in the center of the dent and keep it until it sticks.
4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter.
5. After the glue cools, align it with a golden dent lifter or bridge dent puller, and press the puller to pull up the dent. Repeat the above steps until the dent disappears.
Material: Aluminum + ABS plastic
